TP-Link T1600G-18TS Configuration Manual page 314

Configuring Layer 2 Multicast
Step 2 ip igmp snooping last-listener query-inteval interval
interval
1 to 5 seconds.
Step 3 ip igmp snooping last-listener query-count num
num
Step 4 show ip igmp snooping
Show the basic IGMP snooping configuration.
Step 5 end
Return to privileged EXEC mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure the last listener query count as 5 and the
last listener query interval as 5 seconds:
Switch#configure
Switch(config)#ip igmp snooping
Switch(config)#ip igmp snooping last-listener query-count 5
Switch(config)#ip igmp snooping last-listener query-interval 5
Switch(config)#show ip igmp snooping
IGMP Snooping
Unknown Multicast
Last Query Times
Last Query Interval
Global Member Age Time
Global Router Age Time
Global Report Suppression
Global Authentication Accounting:Disable
Enable Port:
Enable VLAN:
Switch(config)#end
Switch#copy running-config startup-config
determines the interval between MASQs sent by the switch. The valid values are from
determines the number of MASQs sent by the switch. The valid values are from 1 to 5.
:Enable
:Pass
:5
:5
:260
:300
:Disable
IGMP Snooping Configurations
Configuration Guide 291