TP-Link T1600G-18TS Configuration Manual page 363

Configuring Layer 2 Multicast
The following example shows how to bind Profile 1 to port 1/0/2 so that port 1/0/2 filters
multicast data sent to ff01::1234:5-ff01::1234:8:
Switch#configure
Switch(config)#ipv6 mld snooping
Switch(config)#ipv6 mld profile 1
Switch(config-mld-profile)#deny
Switch(config-mld-profile)#range ff01::1234:5 ff01::1234:8
Switch(config-mld-profile)#exit
Switch(config)#interface gigabitEthernet 1/0/2
Switch(config-if)#ipv6 mld snooping
Switch(config-if)#ipv6 mld filter 1
Switch(config-if)#show ipv6 mld profile
MLD Profile 1
deny
range ff01::1234:5 ff01::1234:8
Binding Port(s)
Gi1/0/2
Switch(config)#end
Switch#copy running-config startup-config
Configuring MLD Snooping
Configuration Guide 340