TP-Link T1600G-18TS Configuration Manual page 552

Configuring ACL
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to bind ACL 1 to port 3 and ACL 2 to VLAN 4:
Switch#configure
Switch(config)#interface gigabitEthernet 1/0/3
Switch(config-if)#access-list bind acl 1
Switch(config-if)#exit
Switch(config)#interface vlan 4
Switch(config-if)#access-list bind acl 2
Switch(config-if)#show access-list bind
Index
-----
Index
-----
1
2
Switch(config-if)#end
Switch#copy running-config startup-config
 Policy Binding
You can bind the Policy to a port or a VLAN, then the received packets will be matched and
operated based on the Policy.
Step 1 configure
Enter global configuration mode
Policy Name
-----------
ACL ID
-----------
1
2
Interface/VID
-------------
Interface/VID
-------------
Gi1/0/3
4
ACL Configurations
Direction
--------
Direction
--------
Ingress
Ingress
Configuration Guide
Type
----
Type
----
Port
Vlan
529