Appendix: Default Parameters - TP-Link T1600G-18TS Configuration Manual

Configuring Logical Interfaces
3

Appendix: Default Parameters

Default settings of interface are listed in the following tables.
Table 3-1 Configuring the IPv4 Parameters of the Interface
Parameter
Interface ID
IP Address Mode
Admin Status
Recovery mode
Table 3-2 Configuring the IPv6 Parameters of the Interface
Parameter
IPv6
Config Mode
Enable global address auto
configuration via RA message
Enable global address auto
configuration via DHCPv6
Server
Default Setting
VLAN
None
Enable
Auto
Default Setting
Disable
On VLAN interface 1, it is enabled by default.
Auto
Enable
Disable
Appendix: Default Parameters
Configuration Guide 389