TP-Link T1600G-18TS Configuration Manual page 513

Configuring PoE
System Power
Consumption
System Power
Remain
2) In the Port Config section, select the port you want to configure and specify the
parameters. Click Apply.
PoE Status
PoE Priority
Power Limit
(0.1w-30.0w)
Time Range
PoE Profile
Power(w)
Current(mA)
Voltage(v)
PD Class
Power Status
Displays the real-time system power consumption of the PoE switch.
Displays the real-time system remaining power of the PoE switch.
Enable or disable the PoE function for on corresponding port. The port can supply
power to the PD when its status is enable.
Select the priority level for the corresponding port. When the supply power
exceeds the system power limit, the switch will power off PDs on low-priority
ports to ensure stable running of other PDs.
Specify the maximum power the corresponding port can supply. The following
options are provided:
Auto: The switch will allocate a value as the maximum power that the port can
supply automatically.
Class1: The maximum power that the port can supply is 4W.
Class2: The maximum power that the port can supply is 7W.
Class3: The maximum power that the port can supply is 15.4W.
Class4: The maximum power that the port can supply is 30W.
Manual: Enter a value manually.
Select a time range, then the port will supply power only during the time range. For
how to create a time range, refer to
A quick configuration method for the corresponding ports. If one profile is
selected, you will not be able to modify PoE status, PoE priority or power limit
manually. For how to create a profile, refer to
Using the Profile.
Displays the port's real-time power supply.
Displays the port's real-time current.
Displays the port's real-time voltage.
Displays the class the linked PD belongs to.
Displays the port's real-time power status.
PoE Power Management Configurations
Time Range Function Configurations.
Configuring the PoE Parameters
Configuration Guide 490