Using The Cli - TP-Link T1600G-18TS Configuration Manual

Configuring MAC VLAN
Figure 3-7 VLAN 20 Configuration
3) Click Save Config to save the settings.

3.4 Using the CLI

 Configurations for Switch 1 and Switch 2
The configurations of Switch 1 and Switch 2 are the same. The following introductions take
Switch 1 as an example.
1) Create VLAN 10 for Department A and create VLAN 20 for Department B.
Switch_1#configure
Switch_1(config)#vlan 10
Switch_1(config-vlan)#name deptA
Switch_1(config-vlan)#exit
Switch_1(config)#vlan 20
Switch_1(config-vlan)#name deptB
Switch_1(config-vlan)#exit
2) Set 1/0/2 as tagged port, and add it to both VLAN 10 and VLAN 20.
Switch_1(config)#interface gigabitEthernet 1/0/2
Switch_1(config-if)#switchport general allowed vlan 10,20 tagged
Switch_1(config-if)#exit
Configuration Example
Configuration Guide 176