TP-Link T1600G-18TS Configuration Manual page 673

Configuring LLDP
Application
Type
Unknown Policy
Flag
VLAN tagged
Media Policy
VLAN ID
Media Policy
Layer 2 Priority
Media Policy
DSCP
 Viewing the Neighbor Info
Figure 5-2 LLDP-MED Neighbor Info
Follow these steps to view LLDP-MED neighgbor information:
1) In the Auto Refresh section, enable the Auto Refresh feature and set the Refresh Rate
according to your needs. Click Apply.
2) In the LLDP-MED Neighbor Info section, select the desired port and view the LLDP-
MED settings.
Device Type
Displays the supported applications of the local device.
Displays the unknown location settings included in the network policy TLV.
Displays the VLAN Tag type of the applications, tagged or untagged.
Displays the 802.1Q VLAN ID of the port.
Displays the Layer 2 priority used in the specific application.
Displays the DSCP value used in the specific application.
Displays the LLDP-MED device type of the neighbor device.
Viewing LLDP-MED Settings
Configuration Guide 650