Configuring Igmp Profile - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast

2.1.6 Configuring IGMP Profile

With IGMP Profile, the switch can define a blacklist or whitelist of multicast addresses so as
to filter multicast sources, Choose the menu Multicast > IGMP Snooping > Profile Config
to load the following page.
Figure 2-6 Profile Create
Creating Profile
Follow these steps to create a profile and configure its filtering mode.
1) Create a profile and configure its filtering mode.
Profile ID
Mode
2) Click Create.
Searching Profile
Enter the search condition in the Search Option field to search the profile in the IGMP
Profile Info table.
Enter a profile ID between 1 and 999.
Select Permit or Deny as the filtering mode.
Permit: similar to a whitelist, means that the switch only allows specified member
ports to join specific multicast groups.
Deny: similar to a blacklist, means that the switch disallows specific member ports
to join specific multicast groups.
IGMP Snooping Configurations
Configuration Guide 277