TP-Link T1600G-18TS Configuration Manual page 725

Configuring SNMP & RMON
Step 3 snmp-server engineID {[ local local-engineID ] [remote remote-engineID ]}
(Optional) Configure the local engine ID and the remote engine ID.
local-engineID:
an even number of characters. It is a unique alphanumeric string, used to identify the SNMP
engine on the switch.
remote-engineID:
contain an even number of characters. The remote engine ID is a unique alphanumeric string. It
is used to identify the SNMP engine on the remote device that receives inform messages from
Switch.
Note that the switch will automatically generate a local engine ID if the ID is not set or is
deleted.
Step 4 show snmp-server
Displays the global settings of SNMP.
Step 5 show smnp-server engineID
Displays the engine ID of SNMP.
Step 6 end
Return to privileged EXEC mode.
Step 7 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable SNMP and set 123456789a as the remote
engine ID:
Switch#configure
Switch(config)#snmp-server
Switch(config)#snmp-server engineID remote 123456789a
Switch(config)#show snmp-server
SNMP agent is enabled.
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
Enter the local engine ID with 10 to 64 hexadecimal digits. The ID must contain
Enter the remote engine ID with 10 to 64 hexadecimal digits. The ID must
SNMP Configurations
Configuration Guide 702