Configuring Static Multicast (Multicast Ip And Forward Port) - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable MLD Snooping in VLAN 2 and forbid port
1/0/4-6 from becoming router ports (port 1/0/4-6 will drop all multicast data from Layer 3
devices):
Switch#config
Switch(config)#ipv6 mld snooping
Switch(config)#ipv6 mld snooping vlan-config 2 router-ports-forbidden interface
gigabitEthernet 1/0/4-6
Switch(config)#show ipv6 mld snooping vlan 2
Vlan Id: 2
Router Time:0
Member Time:0
Static Router Port:None
Dynamic Router Port:None
Forbidden Router Port:Gi1/0/4-6
Switch(config)#end
Switch#copy running-config startup-config

Configuring Static Multicast (Multicast IP and Forward Port)

Step 1 configure
Enter global configuration mode.
Step 2 ipv6 mld snooping vlan-config vlan-id-list static ip interface {gigabitEthernet port-list | port-
channel port-channel-id }
vlan-id-list
ip
port-list
multicast IP address in the specified VLAN.
Step 3 show ipv6 mld snooping groups static
Show the static MLD snooping configuration.
Step 4 end
Return to privileged EXEC mode.
specifies the VLAN to be configured.
specifies the static multicast IP address.
and
port-channel-id
specify the forward ports (member ports) bound to the static
Configuring MLD Snooping
Configuration Guide 331