Configuring 802.1X On Ports - TP-Link T1600G-18TS Configuration Manual

Configuring Network Security
Step 9
Step 10
The following example shows how to enable 802.1X authentication, configure PAP as the
authentication method and keep other parameters as default:
Switch#configure
Switch(config)#dot1x system-auth-control
Switch(config)#dot1x auth-method pap
Switch(config)#show dot1x global
802.1X State:
Authentication Method:
Handshake State:
Guest VLAN State:
Guest VLAN ID:
802.1X Accounting State:
Quiet-period State:
Quiet-period Timer:
Max Retry-times For RADIUS Packet: 3
Supplicant Timeout:
Switch(config)#end
Switch#copy running-config startup-config

6.2.3 Configuring 802.1X on Ports

Follow these steps to configure the port:
Step 1
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
Enabled
PAP
Enabled
Disable
N/A
Disable
Disable
10 sec.
3 sec.
configure
Enter global configuration mode.
802.1X Configuration
Configuration Guide 582