Creating And Saving A Master Timeline With The Menu - Sony MVS-8000 User Manual

The display shows the register number last used for master timeline
operation.
6
Press the [EDIT ENBL] button.
This assigns the memory recall section to keyframe effect editing
operations.
7
Press the [STOR] button, turning it on.
8
With the numeric keypad buttons, enter the number of the register (here
"1") in which you want to save the master timeline, and press the [ENTR]
button.
This saves M/E-2 register 15 and P/P register 11 in master timeline register
1. At the same time, the [MSTR RCLL] button lights green.

Creating and Saving a Master Timeline With the Menu

You can save a master timeline using the Effect >Master Timeline >Store
menu.
Recalling the Store menu
1
Do either of the following.
• In the menu control block, press the top menu selection button [EFF].
• In the numeric keypad control block, press the [EFF] button twice in
rapid succession.
The Effect menu appears.
2
Press VF1 'Master Timeline' and HF1 'Store.'
The Master Timeline >Store menu appears.
The status area shows the master timeline register names, register lock
status, register number for each region, and so on.
3
If required, press the following buttons in the status area to change the
region display.
M/E, P/P: indicate assignment of M/E-1 ("M/E1"), M/E-2 ("M/E2"), M/
E-3 ("M/E3"), and P/P ("P/P").
User: indicate assignment of User1 ("USR1"), User2 ("USR2"), User3
("USR3"), User4 ("USR4"), User5 ("USR5"), User6 ("USR6"),
User7 ("USR7"), and User8 ("USR8").
Creating and Saving a Master Timeline
863