Piper Arrow IV Turbo Maintenance Manual page 34

Perform an inspections or operations at each of the inspection
intervals as indicated by a circle (O). (See Notes 1, 2 and 3.)
H. LANDING GEAR GROUP
1. Inspect oleo struts for proper extension (Check fluid level as
required)..............................................................................................
2. Inspect nose gear steering control and travel......................................
3. Check wheels for alignment................................................................
4. Put airplane on jacks...........................................................................
5. Inspect tires for cuts, uneven or excessive wear and slippage............
6. Remove wheels, clean, check and repack bearings ............................
7. Inspect wheels for cracks, corrosion and broken bolts .......................
8. Check tire pressure..............................................................................
9. Inspect brake lining and disc...............................................................
10. Inspect brake backing plates...............................................................
11. Inspect brake and hydraulic lines........................................................
12. Inspect shimmy dampener ..................................................................
13. Inspect gear forks for damage.............................................................
14. Inspect oleo struts for fluid leaks and scoring.....................................
15. Inspect gear struts, attachments, torque links, retraction links and
bolts for condition and security...........................................................
16. Inspect downlock for operation and adjustment (See Note 20)..........
17. Inspect torque link bolts and bushings (Rebush as required)..............
18. Inspect drag and side brace link bolts (Replace as required)..............
19. Inspect gear doors and attachments ....................................................
20. Inspect warning horn and light for operation......................................
21. Retract gear- check operation .............................................................
22. Retract gear- check doors for clearance and operation.......................
23. Inspect anti-retraction system .............................................................
24. Inspect actuating cylinders for leaks and security ..............................
25. Inspect all hydraulic lines, electrical leads, and attaching parts
for security, routing, chafing, deterioration, wear and correct
installation (See latest revisions of Piper Service Letters
808 and 810) .......................................................................................
26. Inspect position indicator switch and electrical leads for
security................................................................................................
27. Lubricate per lubrication chart............................................................
28. Insure landing gear is down and locked; then remove airplane
from jacks............................................................................................
PIPER AIRCRAFT
PA-28RT-201 / 201T
MAINTENANCE MANUAL
PERIODIC INSPECTIONS. (cont)
—NOTE—
Nature of Inspection
1B10
Inspection Time (hrs)
50 100 500
O O O
O O
O O
O O
O O
O O
O O
O O O
O O
O O
O O
O O
O O
O O
O O
O O O
O
O O
O O
O O
O O
O O
O O
O O
O O
O O O
O O
5-20-01
Page 5-11
Revised: December 21, 1981
1000
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O