Velocity 7330 Appliance Compute Node Disk Drive Configurations - VERITAS Velocity 7330 Hardware Installation Manual

Velocity 7330 Appliance compute node disk drive
configurations

Velocity 7330 Appliance compute node disk drive configurations

(continued)
Table 1-1
Feature
Rear panel ports (built into the chassis)
The Velocity 7330 Appliance compute node contains eight 3TB SAS disk drives.
Individual disk drive carriers hold each of the disk drives, and each disk drive carrier
resides in a front panel disk drive slot. The disk drives are assigned numbers, which
are based on the drive slot they occupy.
See Figure 1-1.
Velocity 7330 Appliance compute node front panel disk slot
Figure 1-1
assignments
The Velocity 7330 Appliance compute node uses the following disk slot assignments
and RAID disk assignments:
Slot 0 - Disk0 of RAID1, Volume 0 (set as the Boot volume and contains the
■
operating system)
Slot 1 - Disk1 of RAID1, Volume 0 (set as the Boot volume and contains the
■
operating system)
Slot 2 - Hot spare disk
■
Description
One 1 Gb/s IPMI remote network port
One VGA port
Four 1 GbE network ports, with an RJ-45
connector, and link and activity LEDs. Two
of the ports are reserved for private networks.
Two 10 GbE network ports, with Small
Form-factor Pluggable (SFP) modules, and
link and activity LEDs.
See " Velocity 7330 Appliance compute node
rear panel" on page 10.
Hardware overview 9