Circuit Breakers - Tennant ATLV 4300 Service Manual

ELECTRICAL
FUSE
The fuse is a one-time protection device designed
to stop the flow of current in the event of a circuit
overload.
NOTE: Never substitute higher value fuses than
specified.
The fuse is an in--line type and is located in the
main harness, behind the circuit breaker panel.
Fuse Rating Circuit Protected
FU-1 30 A Glow plug

CIRCUIT BREAKERS

The circuit breakers are resettable electrical
circuit protection devices. Their design stops the
flow of current in the event of a circuit overload.
Once a circuit breaker is tripped, it must be reset
manually. Press the reset button after the breaker
has cooled down.
If the overload that caused the circuit breaker to
trip is still there, the circuit breaker will continue to
stop current flow until the problem is corrected.
The circuit breaker panel is located above the foot
pedals
The chart lists the circuit breakers and the
electrical components they protect.
Breaker Rating Circuit Protected
CB-1 15 A Accessory/ Vac/ Hyd
CB-2 15 A Horn
CB--3 15 A Work Lights (Opt)
CB-4 15 A Operating Lights
CB-5 15 A Brake/ Turn signals (Opt)
CB-6 15 A Options
CB-7 15 A Options
CB-8 15 A Options
4-8
ATLV 4300 330495 (10- -98)