Tennant ATLV 4300 Service Manual page 107

20. Reinstall the directional pump arm onto the
pump hub. Reinstall the two hex screws.
Leave the screws loose for now.
21. The neutral centering will have to be set at
this point. See TO ADJUST PROPEL
NEUTRAL instructions in the CHASSIS
section.
22. Reinstall the left hand side panel and left
hand grill.
23. Reinstall the rear engine cover.
24. Tilt the hopper forward, close the hopper
cover, and close the top engine cover.
25. Start the machine and operate the propel
circuit. Check for proper operation.
ATLV 4300 330495 (10- -98)
HYDRAULICS
5-9