To Remove Engine - Tennant ATLV 4300 Service Manual

TO REMOVE ENGINE

FOR SAFETY: Before Leaving Or
Servicing Machine; Stop On Level
Surface, Set Parking Brake, And Turn
Off Machine.
1. Open the hopper cover and tilt the hopper
back. Close the hopper cover.
2. Open the top engine cover.
3. Remove the five pan screws holding the rear
engine cover to the machine. Remove the
cover.
4. Pivot the seat assembly forward and engage
the prop rod.
5. Disconnect the battery cables.
6. Remove both side fenders.
7. Remove the top engine cover and prop rod
at the hinges.
8. Remove the engine cover prop rod cross
brace.
9. Remove the black cross brace running
between the legs of the roll bar.
10. Remove the clamps holding the two air
hoses of the air cleaner assembly to the
engine and intake tube. Remove the two air
cleaner hoses.
11. Remove the two M10 hex screws holding
the air cleaner mounting bracket to the
bellhousing. Remove the air cleaner
assembly from the machine.
12. Drain the anti--freeze from the cooling
system. Remove the radiator hoses from the
engine. Disconnect the hose leading to the
overflow tank.
13. Remove the four M10 hex screws holding
the bottom of the radiator/cooler/shroud
assembly to the machine frame.
ATLV 4300 330495 (10- -98)
ENGINE- -DIESEL
6-11