To Replace Engine Alternator - Tennant ATLV 4300 Service Manual

ELECTRICAL

TO REPLACE ENGINE ALTERNATOR

FOR SAFETY: Before Leaving Or
Servicing Machine; Stop On Level
Surface, Set Parking Brake, Turn Off
Machine And Remove Key.
1. Tilt the seat assembly forward and engage
the prop rod. Disconnect the battery cables
from the battery.
2. Open the top engine cover.
3. Locate the alternator at the front right area
of the engine.
4. Disconnect the wires from the back of the
alternator.
5. Loosen the hex screw holding the top of the
alternator to the pivot bracket.
6. Loosen the hex screw on the bottom of the
alternator.
7. Pivot the alternator in toward the engine and
remove the fan belt from the sheave.
8. Remove both hex screws. Remove the old
alternator out past the exhaust pipe.
9. Position the new alternator in place. Go in
front the exhaust pipe.
10. Reinstall the longer lower hex bolt and nut.
Leave loose for now.
11. Reinstall the shorter hex bolt in the top of
the alternator. Leave loose for now.
12. Reinstall the fan/alternator belt.
4-14
ATLV 4300 330495 (10- -98)