Tennant ATLV 4300 Instruction Bulletin

INSTRUCTION BULLETIN
NOTE: DO NOT DISCARD the Parts List from the Instruction Bulletin. Place the Parts
List in the appropriate place in your machine manual for future reference.
Retaining the Parts List will make it easier to reorder individual parts and will
save you the cost of ordering an entire kit.
NOTE: Numbers in parenthesis ( ) are reference numbers for parts listed in Bill of Materials.
Installation instructions for kit number 368670
DESCRIPTION:
This kit contains the parts needed to install a hopper latch spacer on the model ATLV 4300
Litter Vacuum.
Please follow step-by-step instructions.
SPECIAL TOOLS / CONSIDERATIONS: NONE
(Estimated time to complete: 1 hour)
INSTALLATION:
1. Park the machine on a clean, level surface.
Activate the machine parking brake.
FOR SAFETY: Before leaving or servicing
machine, stop on level
surface and set parking brake.
2. Release the hopper latch and remove the smaller
latch piece from the hopper. Set the latch piece
aside.
3. Position the new latch plate (1) so that the larger
mounting holes are aligned with the mounting
holes already in the hopper. The smaller threaded
holes drilled in the new latch plate should be on
top of the larger mounting holes.
(Refer to photo in step 4).
IB 340541 (4-02)
No. 340541
Machine: ATLV 4300
Published: 4-02
Rev. 01
1