TO INSTALL SEAT ASSEMBLY
FOR SAFETY: Before Leaving Or
Servicing Machine; Stop On Level
Surface, Set Parking Brake, turn off
machine, and remove key.
1. Position the seat assembly onto the
machine.
2. Hold the seat up with an overhead hoist or a
piece of wood.
3. Install the four hex screws and nuts. Tighten
to 8 -- 10 Nm (6 -- 8 ft. lb).
4. Drop the seat down enough to place the end
of the prop rod into the access hole.
5. Drop the seat assembly down and remove
the hoist.
ATLV 4300 330495 (10- -98)
CHASSIS
2-5