Tennant ATLV 4300 Service Manual page 16

GENERAL INFORMATION
6. Set the parking brake, lower the vacuum
head and block the machine tires. Tie down
the machine to the truck or trailer before
transporting.
If the machine does not have the optional tie
down bracket, tie the front end down with a
tie strap over the floor of the machine.
If the machine does have an optional tie
down bracket, tie down the machine to the
truck or trailer with it.
The rear tie-down locations are through the
rear holes of the frame.
7. If the loading surface is not horizontal or is
higher than 380 mm (15 in) from the ground,
use a winch to unload machine.
If the loading surface is horizontal AND is
380 mm (15 in) or less from the ground, the
machine may be driven off the truck or
trailer.
FOR SAFETY: When unloading machine
off truck or trailer, use winch. Do not
drive the machine off the truck or trailer
unless the loading surface is horizontal
AND 380 mm (15 in) or less from the
ground.
1-14
ATLV 4300 330495 (6- -01)