Tennant ATLV 4300 Service Manual page 118

HYDRAULICS
8. Reinstall the hex screws and nuts into the
clevises. Tighten to 64 -- 83 Nm
(47 -- 61 ft. lb.)
9. Reconnect the hydraulic hoses to the new
steering cylinder. See hose diagram in this
section.
10. Check the front wheel alignment. See TO
ALIGN FRONT TIRES instructions in this
section.
11. Remove the jack stands and lower the
machine to the floor.
12. Operate the machine and check the new
steering cylinder for proper operation.
5-20 ATLV 4300 330495 (10- -98)