Tennant ATLV 4300 Service Manual page 78

ELECTRICAL
12. Install the rubber boot onto the out side of
the new circuit breaker.
13. Reconnect the electrical wires to the new
circuit breaker. See schematic in the
ELECTRICAL section.
14. Reinstall the instrument panel. See TO
INSTALL INSTRUMENT PANEL instructions
in this section.
15. Open the seat support and engage the prop
rod.
16. Reconnect the battery cable to the battery
(red cable to positive post, black cable to
negative post)
17. Disengage the prop rod and lower the seat
support.
18. Start the machine and check for proper
operation.
4-10
ATLV 4300 330495 (10- -98)