Licensing Requirements For Fc Npv; Configuring Npv - Cisco N9K-C93180YC-FX Configuration Manual

Configuring N Port Virtualization

Licensing Requirements for FC NPV

The following table shows the licensing requirements for FC NPV.
Product
Cisco NX-OS

Configuring NPV

Installing the Fibre Channel Port License
This section explains how to install the licensing for FC NPV.
Before You Begin
Enabling the port license requires fibre channel (FC) ports.
Procedure
Install the license key file:
Example:
Installing license ..done
Enabling FC NPV
FC NPV is enabled when feature-set fcoe-npv is installed and enabled.
To enable fcoe-npv, perform this task:
This enables both FC and FCoE NPV mode.
Note
Product ID
• N93-16Y-SSK9
• N93-48Y-SSK9
switch# install license bootflash:license_file.lic
Licensing Requirements for FC NPV
License Requirement
FC NPV requires the following:
• FC NPV (up to 16 ports) and FCoE NPV
• FC NPV (up to 48 ports) and FCoE NPV
Note For a complete explanation of the Cisco
NX-OS licensing scheme and how to obtain
and apply licensees, see the
Licensing Guide.
Cisco Nexus 9000 Series NX-OS FC NPV Configuration Guide
Cisco NX-OS
13