Clear Netflow-Lite Monitor Statistics Interface - Cisco Catalyst 4500 Series Command Reference Manual

clear netflow-lite monitor statistics interface

clear netflow-lite monitor statistics interface
NetFlow-lite is only supported on the Catalyst 4948E and Catalyst 4948E-F Ethernet switches.
Note
To clear statistics of a packet sampler at a monitor, use the clear netflow-lite monitor statistics
interface command.
Syntax Description vlan-id
Defaults
None
Command Modes Privileged EXEC mode
Command History Release
15.0(2)SG
Examples
The following examples show how to clear statistics of a packet sampler at a monitor:
Switch# clear netflow-lite monitor 1 statistics int gi1/1
Switch# clear netflow-lite monitor 1 statistics vlan 10
Related Commands Command
clear netflow-lite exporter
statistics
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-122
clear netflow-lite monitor statistics interface vlan-id
Specifies an interface.
Modification
Command introduced on the Catalyst 4948E and Catalyst 4948E-F Ethernet
switches.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Clear the collector statistics.
OL-27596 -01