Table 4-8 Lcr-6300'S Predefined Test Frequencies That Can Be Selected By Using Incr+/Decr; Table 4-9 Lcr-6200'S Predefined Test Frequencies That Can Be Selected By Using Incr+/Decr; Table 4-10 Lcr-6100'S Predefined Test Frequencies That Can Be Selected By Using Incr+/Decr; Table 4-11 Lcr-6020'S Predefined Test Frequencies That Can Be Selected By Using Incr+/Decr - Cubicon Lux User Manual

Table ‎ 4 -8
Table ‎ 4 -9
Table ‎ 4 -10
Table ‎ 4 -11
30
Procedure for setting test frequency [FREQ]
Step 1. Press the [Measure] key.
Step 2. Use the cursor key to select the [FREQ] field.
Step 3. Use the soft-keys or numeric entry keys to enter
the test frequency.
When data is entered with the numeric keys, the soft-keys
change to unit labels (Hz, kHz).
Soft-key Function
INCR + Be used to select between predefined
measuring frequencies.
DECR -
Refer to Table ‎ 4 -8, Table ‎ 4 -9, Table ‎ 4 -10,
Table ‎ 4 -11, Table ‎ 4 -12.
LCR-6300's predefined test frequencies that can be
selected by using INCR+/DECR‐
INCR+/DECR-
10Hz 50Hz
1kHz 2kHz
50kHz 100kHz
LCR-6200's predefined test frequencies that can be
selected by using INCR+/DECR‐
INCR+/DECR-
10Hz 50Hz
1kHz 2kHz
50kHz 100kHz
LCR-6100's predefined test frequencies that can be
selected by using INCR+/DECR‐
INCR+/DECR-
10Hz 50Hz
1kHz 2kHz
50kHz 100kHz
LCR-6020's predefined test frequencies that can be
selected by using INCR+/DECR‐
INCR+/DECR-
10Hz 50Hz
1kHz 2kHz
60Hz 100Hz
10kHz 20kHz
200kHz 250kHz
60Hz 100Hz
10kHz 20kHz
200kHz
60Hz 100Hz
10kHz 20kHz
60Hz 100Hz
10kHz 20kHz
Measure Key
120Hz
40kHz
300kHz
120Hz
40kHz
120Hz
40kHz
120Hz