Sav; Rcl - Cubicon Lux User Manual

Note

11.19.3 *SAV

*SAV = FILE:SAVE
The *SAV command saves all user settings into the currently used file.
Command
Syntax
Example

11.19.4 *RCL

*RCL = FILE:LOAD
The *RCL command recalls all user settings from the currently used file.
Command
Syntax
Example
126
This command can be used in BUS trigger mode.
*TRG = TRIG;:FETC?
*SAV
SEND> *SAV<NL>
*RCL
SEND> *RCL<NL>
Command Reference