Table of Contents
Advertisement
11.10 FETCh Subsystem
The FETCh subsystem command group is a sensor-only command which
retrieves the measurement data taken by measurement(s) initiated by a trigger,
and places the data into the output buffer.
Figure 1 1-7
11.10.1 FETCh?
The FETCh? query sets the latest measurement data of the primary, secondary
parameters and comparator result into the output buffer.
Query Syntax
Query Response
Example
When in the [LIST MEAS] page view, the following description for the
FETCh query is applicable:
The FETCh? query sets the latest LIST measurement data of the primary
parameters, secondary parameters and comparator results into the output
buffer.
Query Syntax
Query Response
Example
108
FETCh Subsystem Command Tree
FETCh?
<NR3:primary value>,<NR3:secondary
value>,<comparator result>
SEND> FETC?<NL>
RET>
+2.61788e-11,+5.45442e-01,BIN1,AUX-
OK,OK <NL>
RET>
+1.23434e+05,OUT ,NG <NL>//DCR &
Comp on.
FETCh?
<NR3:primary value>,<NR3:secondary value>,
<CMP result>
SEND> FETC?<NL>
RET>
-2.98524e-12,+3.27673e+00,L <NL>
RET>
-1.00000e+20,-1.00000e+20,- <NL>//The
STEP is OFF
IMPedance?
FETCh
MAIN?
MONitor1
MONitor2
LIST
Command Reference
?
?
?
Advertisement
Table of Contents
