Measurement Speed [Speed] - Cubicon Lux User Manual

4.1.6 Measurement Speed [SPEED]

NOTE
SLOW, MED and FAST can be selected for LCR-6000
Series.
SLOW mode will result in more stable and accurate
measurement results.
Procedure for setting measurement speed mode
Step 1. Press the [Measure] key.
Step 2. Use the cursor key to select the [SPEED] field.
Step 3. Use the soft-keys to set measurement speed.
Soft-key
FAST
MED
SLOW
*1. Measurement speed in 300kHz, typical. The
Measurement Speed time is the trigger to the
end of measurement (EOM) output on the
Handler.
Display: [BIN MEAS] Page
[RANGE]: HOLD RANGE
[AVG]: 1
[BIAS]: OFF
[AUTO LCZ]: OFF
[MON 1] [MON 2]: OFF
[DELAY]: 0 ms
[ALC]: OFF
Measurement speed [ms]
Test Frequency(Hz)
10
20
100
LCR-6000 Series User Manual
Function
*1
40 times/sec
*1
10 times/sec
*1
3 times/sec
Speed
SLOW MED
1600 1600
800 800
483 160
FAST
1600
800
160
33