Table of Contents
Advertisement
Query Response
Example
11.7.2 FUNCtion:IMPedance:AUTO
The FUNCtion:IMPedance:AUTO command sets the impedance's LCZ
Automatic selection.
Command
Syntax
Example
Query Syntax
Query Response
Example
11.7.3 FUNCtion:IMPedance:RANGe
The FUNCtion:IMPedance:RANGe command sets the impedance's
measurement range.
Command
Syntax
Parameter
Example
Query Syntax
Query Response
Example
11.7.4 FUNCtion:DCR:RANGe
The FUNCtion:DCR:RANGe command sets the DCR's measurement range.
Command
Syntax
Parameter
Example
Query Syntax
<function>
SEND> FUNC?<NL>
RET>
Cp-D<NL>
FUNC:IMPedance:AUTO {ON,OFF, 0,1}
SEND> FUNC:IMP:AUTO ON<NL>
FUNC:IMPedance:AUTO?
{on,off}<NL>
SEND> FUNC:IMP:AUTO?<NL>
RET>
off<NL>
FUNC:IMPedance:RANGe <0-8,MIN,MAX>
Where, <0-8,MIN, MAX> is:
0-8
The range number
MIN
=Range 0
MAX
=Range 8
SEND> FUNC:IMP:RANG 2<NL>//Set
measurement range to [2] 10k.
FUNC:IMPedance:RANGe?
<0-8><NL>
SEND> FUNC:IMP:RANG?<NL>
RET>
0<NL>
FUNC:DCR:RANGe <0-8,MIN,MAX>
Where, <0-8,MIN, MAX> is:
0-8
The range number
MIN
=Range 0
MAX
=Range 8
SEND> FUNC:DCR:RANG 2<NL>//Set DCR range
to [2] 10k.
FUNC:DCR:RANGe?
LCR-6000 Series User Manual
101
Advertisement
Table of Contents
