Auto Lcz Function [Auto Lcz]; Monitor 1 And Monitor 2 [Mon 1][Mon 2] - Cubicon Lux User Manual

5.1.4 Auto LCZ Function [AUTO LCZ]

NOTE
NOTE

5.1.5 Monitor 1 and Monitor 2 [MON 1][MON 2]

NOTE
54
test.
-2V -2V voltage is applied to the device under
test.
Bias Voltage range
0.01V ≦ DC BIAS ≦ 2.50V
-2.50V≦ DC BIAS ≦ -0.01V
Auto LCZ Function can help you to select a proper
measurement parameter.
Auto LCZ Function cannot judge complex
components, please do not rely entirely on this
function to measure.
To set up the Auto LCZ Function
Step 1. Press the [Setup] key
Step 2. Use the cursor key to select [AUTO LCZ] field
Step 3. Use the soft-keys to turn on/off the Auto
LCZ Function.
Soft-key Function
OFF Turn off the Auto LCZ Function
ON Turn on the Auto LCZ Function.
When Auto LCZ Function is set to ON,
"AUTO-LCZ" will display on [FUNC]
field.
The Auto LCZ Function will be turned off after you
set the measurement function.
The LCR-6000 Series can monitor the other two
parameters.
Additional monitoring parameters do not
increase the instrument measurement time.
Monitor parameter display in [MEAS DISPLAY]
page and [ENLARGE] page.
Setup Key
Resolution
0.01V
0.01V