Account Setting - Cubicon Lux User Manual

6.1.2 Account Setting

70
Soft-key
HOUR INCR+
HOUR DECR-
MINUTE INCR+
MINUTE INCR-
SECOND DECR+ Increases the second in steps of 1.
SECOND DECR-
The LCR-6000 Series has two accounts, administrator
and user.
Administrator: All functions can be configured by the
administrator except [SYSTEM SERVICE] page.
User: All functions can be configured by user except the
[SYSTEM SERVICE] page and the [FILE] page.
To Change Account
Step 1. Press the [Measure] or [Setup] key.
Step 2. Press the [SYSTEM] bottom soft-key.
Step 3. Use the cursor key to select ACCOUNT field.
Step 4. Use the soft-keys to change account.
Soft-key Function
ADMIN Administrator
USER User
Switch user mode to administrator mode, you must input
a correct password.
To Change Administrator's Password
Step 1. Press the [Measure] or [Setup] key.
Step 2. Press the [SYSTEM] bottom soft-key.
Step 3. Use the cursor key to select
[ADMINISTRATOR] field. When the
ACCOUNT field is [USER], you should
change to [ADMINISTRATOR].
Step 4. Use the soft-keys to change the password or
delete the password.
Soft-key Function
CHANGE Input password (less than 9 numbers).
PASSWORD
DELETE The password will be removed.
PASSWORD
Function
Increases the hour in steps of 1.
Decreases the hour in steps of 1.
Increases the minute in steps of 1.
Decreases the minute in steps of 1.
Decreases the second in steps of 1.
System Configurations