Correction:open:state; Correction:open:lcr; Correction:open:dcr; Correction:short - Cubicon Lux User Manual

11.13.2 CORRection:OPEN:STATe

The CORRection:OPEN:STATe command sets the OPEN correction
function to ON or OFF.
Command
Syntax
Parameter
Example
Query Syntax
Query Response
Example

11.13.3 CORRection:OPEN:LCR

The CORRection:OPEN:LCR command execute all preset OPEN correction
data measurement points (AC).
Command
Syntax
Example

11.13.4 CORRection:OPEN:DCR

The CORRection:OPEN:DCR command execute all preset OPEN correction
data measurement points (DC).
Command
Syntax
Example

11.13.5 CORRection:SHORt

The CORRection:SHORt command execute all preset SHORT correction
data measurement points.
Command
Syntax
Example
118
pass/fail<NL> //Finish or Undone
CORRection:OPEN:STATe {ON,OFF or 1,0}
ON, 1 Set up the function is ON
OFF,0 Set up the function is OFF
SEND> CORR:OPEN:STATe ON<NL>
RET> null
CORRection:OPEN:STATe?
{on,off}
SEND> CORR:OPEN:STATe?<NL>
RET> on<NL>
CORRection:OPEN:LCR
SEND> CORRection:OPEN:LCR<NL>
RET> LCR open<NL> // Run
pass/fail<NL> //Finish or Undone
CORRection:OPEN:DCR
SEND> CORRection:OPEN:DCR<NL>
RET> DCR open<NL> // Run
pass/fail<NL> //Finish or Undone
CORRection:SHORt
SEND> CORRection:SHOR<NL>
RET> short<NL>
Command Reference