Note
11.8.4 LEVel:ALC (=AMPlitude:ALC)
The LEVel:ALC or AMPlitude:ALC command enables the Automatic Level
Control (ALC).
Command
Syntax
Parameter
Example
Query Syntax
Query Response
Example
Note
11.8.5 LEVel:MODe?
The LEVel:MODe? query returns the level mode.
Query Syntax
Query Response
Example
106
The suffix unit can't be used with this command.
This command CANNOT be used in LIST SWEEP.
DISPLAY page and CORRECTION page.
LEVel:ALC {on,1,off,0}
AMPlitude:ALC {on,1,off,0}
{on,1,off,0}
Where,
on (1)
Enable ALC
off(0)
Turn off the ALC.
SEND> LEV:ALC on<NL>
LEV:ALC?
or AMP:ALC?
{on,off}
SEND> LEV:ALC?<NL>
RET>
off<NL>
This command CANNOT be used in LIST MEAS page ,
CORRECTION page and DCR mode.
LEVel:MODe?
{volt, curr}
SEND> LEVel:MODe?<NL>
RET>
volt
Command Reference