Figure 4 -7
4.5.2 Direct Comparison Function
Figure 4 -8
50
[ENLARGE DISPLAY] Page
The Direct Comparison function can be turned on in the
[BIN SETUP] page. When the number of bins is set to 1
in the [BIN SETUP] page, the Direct Comparison
function will be activated for the
[ENLARGE DISPLAY] mode. To activate Direct
Comparison, choose "1-BINS" in the [BIN SETUP]
page. Please refer to the Total Number of Bins [#‐BINS]
chapter on page 63 on how to choose "1-BINS".
Direct Comparison setting
Measure Key