Table of Contents
Advertisement
11.11.5 COMParator:TOLerance:NOMinal
The COMParator:TOLerance:NOMinal command sets the nominal value for
the tolerance mode of the comparator function.
Command
Syntax
Parameter
Example
Query Syntax
Query Response
Example
11.11.6 COMParator:TOLerance:BIN
The COMParator:TOLerance:BIN command sets the low/high limit values
of each BIN for the comparator function tolerance mode.
Command
Syntax
Parameter
Example
Query Syntax
Parameter
Query Response
Example
11.11.7 COMParator:SLIM
The COMParator:SLIM or COMParator:secondary command sets the
LOW/HIGH limit values for the secondary parameter.
Command
Syntax
Parameter
COMParator:TOLerance:NOMinal <value>
Where,<value> is:
NR1, NR2 or NR3
A suffix multiplier can be used with this command. But
the suffix unit F//H can't be used.
SEND> COMP:TOL:NOM 100N<NL>
SEND> COMP:TOL:NOM 1E-6<NL>
COMParator:TOLerance:NOMinal?
<NR3>
SEND> COMP:TOL:NOM?<NL>
RET>
1.00000e-06<NL>
COMParator:TOLerance:BIN <n>,<low limit>,<high
limit>
Where,<n>,<low limit>,<high limit> is:
n
NR1 (1 to 9): Bin number
low limit NR1,NR2 or NR3: low limit value
high limit NR1,NR2 or NR3: high limit value
SEND> COMP:TOL:BIN 1,100P,200P<NL>
SEND> COMP:TOL:BIN 2,200E-6,300E-6<NL>
COMParator:TOLerance:BIN? <n>
Where,<n> is:
NR1 (1 to 9): Bin number
<NR3:low limit>,<NR3:high limit>
SEND> COMP:TOL:BIN? 2<NL>
RET>
1.00000e-06,2.00000E-6<NL>
COMParator:SLIM <low value>,<high value>
COMParator:secondary <low value>,<high value>
Where, <low value>,<high value> is:
<low value>
<high value>
LCR-6000 Series User Manual
NR1,NR2 or NR3: low limit value
NR1,NR2 or NR3: high limit value
113
Advertisement
Table of Contents
