Table of Contents
Advertisement
4.1.7 Measurement log [LOG]
34
1k
2k
10k
100k
300k
DCR
The LCR-6000 has an internal data buffer that record up
to 10000 measurement readings. These readings can be
saved to an external USB drive in a .csv file format.
These readings can then be opened on a PC using
software such as Windows Excel. When the LOG
function is active, the display is fixed to the [MEAS
DISPLAY] screen. The [FUNC], [FREQ] and [LEVEL]
settings are also fixed and cannot be changed.
Procedure for setting Log
Step 1.
Press the [Measure] key.
Step 2.
Use the left/right cursor keys to select the
LOG status field.
Step 3.
Use the [START LOG] soft-keys to start a
new log.
Soft-key
START LOG
Step 4.
After a new log has started, the measurement
readings will be recorded into the meter's
internal buffer. The options in the following
table are available during this recording
process:
Soft-key
Function
STOP
Stops the recording and temporarily
saves the logs into the buffer. An
exclamation mark will be added after
the record counts (in the [LOG] status
field) to remind you that there are
recorded readings in the buffer that
have not yet been processed.
342
94
336
91
332
88.5
332
88.5
332
88.5
333
171
Function
To start a new measurement log.
Measure Key
30
26.5
24.5
24.5
24.5
48
Advertisement
Table of Contents
