Measurement Delay [Delay]; Auto Level Control [Alc] - Cubicon Lux User Manual

5.1.6 Measurement Delay [DELAY]

5.1.7 AUTO LEVEL CONTROL [ALC]

Procedure for setting monitor parameters (monitor 1
and monitor 2)
Step 1. Press the [Setup] key.
Step 2. Use the cursor key to select [MON 1] or
[MON 2] field.
Step 3. Use the soft-keys to select DC bias voltage.
Soft-key Function
OFF Turn off the monitor
Z Absolute value of impedance
D Dissipation factor
Q Quality factor(=1/D)
Vac Test signal Voltage
Iac Test signal Current
Δ Absolute deviation value
Δ% Relative deviation value
θr Phase radian
θd Phase angle
R Resistance (=Rs)
X Reactance
G Conductance
B Sustenance
Y Absolute value of admittance
This setting decides how long the meter will wait to
commence a measurement after the trigger signal is
received. Settable range: 0ms to 60s.
The automatic level control (ALC) feature adjusts the
voltage across the DUT or the current through the DUT
to match the voltage/current level setting. Using this
feature, you can try to ensure a constant signal level
(voltage or current) is applied to the DUT.
LCR-6000 Series User Manual
55