11.9 APERture Subsystem
The APERture subsystem command sets the integration time of the ADC and
the averaging rate.
Figure 1 1-6
Command
Syntax
Parameter
Example
Query Syntax
Query Response
Example
11.9.1 APERture:RATE?
The APERture:RATE? query returns the current integration time.
Query Syntax
Query Response
Example
11.9.2 APERture:AVG?
The APERture:AVG? query returns the averaging rate settings.
Query Syntax
Query Response
Example
APERture Subsystem Command Tree
APERture
APERture {SLOW,MED,FAST}
APERture <value>
SPEED(spd) {SLOW,MED,FAST}
SPEED(spd) <value>
Where,
SLOW
Set test speed to slow
MED
Set test speed to medium
FAST
Set test speed to fast
<value> NR1(0 to 256): Averaging rate (0=OFF=1)
SEND> APER FAST<NL>
SEND> APER 10<NL>
APER?
{SLOW,MED,FAST},<avg value>
SEND> APER?<NL>
RET>
slow,0<NL>
APER:RATE?
SLOW
SEND> APER:RATE?<NL>
RET>
slow<NL>
APER:AVG?
<NR1>
Integer (0 to 256)
SEND> APER:AVG?<NL>
RET>
0<NL>
LCR-6000 Series User Manual
{SLOW,MED,FAST}
<averaging rate value:NR1>
107