Table of Contents
Advertisement
Figure 4 -5
4.3.1 Measurement Function [FUNC]
4.3.2 Test Mode [MODE]
42
[LIST SETUP] Page
Select the primary and the secondary measurement here.
The [LIST MEAS] page will execute a list of up to 10
swept frequency or amplitude tests.
When [MODE] is set to SEQ and [TRIG] is set to
MAN, the [LIST MEAS] function will automatically
execute each test step on the list in sequence until the
last step is executed. The meter will then wait for the
trigger button to be depressed before repeating the
process.
When [MODE] is set to STEP and [TRIG] is set to
MAN, the [LIST MEAS] function will automatically
execute the first test step. The meter will then wait for
the trigger button to be depressed before executing the
next step. This process is repeated for each step on the
list.
Soft-key
SEQ
STEP
There are 4 available trigger modes in the [LIST MEAS]
page.
Function
Sequence measure all step by one
trigger.
Measure one step by one trigger.
Measure Key
Advertisement
Table of Contents
