Comparator:beep; Comparator:open - Cubicon Lux User Manual

Example
Query Syntax
Query Response
Example

11.11.8 COMParator:BEEP

The :COMParator:BEEP command sets beep mode of the comparator
function.
Command
Syntax
Parameter
Example
Query Syntax
Query Response
Example

11.11.9 COMParator:OPEN

The :COMParator:OPEN command selects the open condition for main
parameter.
Command
Syntax
Parameter
Example
Query Syntax
Query Response
Example
114
A suffix multiplier can be used with this command.
SEND> COMP:SLIM 0.0001,0.0010<NL>
COMParator:SLIM?
COMParator:secondary?
<NR3:low limit>,<NR3:high limit>
SEND> COMP:SLIM?<NL>
RET> 1.00000e-04,1.00000e-03<NL>
COMParator:BEEP {OFF,PASS,FAIL}
Where,
OFF Turns the beeper off.
PASS Sounds a beep when the test is passed
(BIN1~BIN9).
FAIL Sounds a beep when the test is failed (OUT).
SEND> COMP:BEEP PASS<NL>
COMParator:BEEP?
{OFF,PASS,FAIL}
SEND> COMP:BEEP?<NL>
RET> OFF<NL>
COMParator:OPEN {OFF,2,5,10,20,50}
Where,
OFF Turns the beeper off.
2,5,10,20,50
SEND> COMP:OPEN 2<NL>
COMParator:OPEN?
{OFF,2,5,10,20,50}
SEND> COMP:OPEN?<NL>
RET> OFF<NL>
The percent range value
Command Reference