Showing Ipv6 Information; Showing An Ipv6 Interface - Dell Force10 Z9000 Configuration Manual

Hide thumbs Also See for Force10 Z9000:
Table of Contents

Advertisement

snmp-server group access-list-name ipv6

Showing IPv6 Information

View specific IPv6 configuration with the following commands.
List the IPv6 show options.
EXEC mode or EXEC Privileged mode
show ipv6 ?
Example of show ipv6 Command Options
Dell#show ipv6 ?
accounting
IPv6 accounting information
cam
IPv6 CAM Entries
fib
IPv6 FIB Entries
interface
IPv6 interface information
mbgproutes
MBGP routing table
mld
MLD information
mroute
IPv6 multicast-routing table
neighbors
IPv6 neighbor information
ospf
OSPF information
pim
PIM V6 information
prefix-list
List IPv6 prefix lists
route
IPv6 routing information
rpf
RPF table
Dell#

Showing an IPv6 Interface

To view the IPv6 configuration for a specific interface, use the following command.
Show the currently running configuration for the specified interface.
EXEC mode
show ipv6 interface interface {slot/port}
Enter the keyword interface then the type of interface and slot/port information:
– For all brief summary of IPv6 status and configuration, enter the keyword brief.
– For all IPv6 configured interfaces, enter the keyword configured.
– For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
– For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.
– For a Loopback interface, enter the keyword loopback then a number from 0 to 16383.
– For a port channel interface, enter the keywords port-channel then a number.
– For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Example of the show ipv6 interface Command
Dell#show ipv6 int ManagementEthernet 1/1
ManagementEthernet 1/1 is up, line protocol is up
IPV6 is enabled
Stateless address autoconfiguration is enabled
Link Local address: fe80::201:e8ff:fe8b:386e
Global Unicast address(es):
Actual address is 400::201:e8ff:fe8b:386e, subnet is 400::/64
Actual address is 412::201:e8ff:fe8b:386e, subnet is 412::/64
Virtual-IP IPv6 address is not set
Received Prefix(es):
400::/64 onlink autoconfig
Valid lifetime: 2592000, Preferred lifetime: 604800
Advertised by: fe80::201:e8ff:fe8b:3166
346
IPv6 Routing

Advertisement

Table of Contents
loading

Table of Contents