Dell Force10 Z9000 Configuration Manual page 663

Dell#show role mode configure interface
Role access: netadmin, sysadmin
Dell#show role mode configure line
Role access: netadmin,sysadmin
Displaying Information About Users Logged into the Switch
To display information on all users logged into the switch, using the show users command in EXEC Privilege mode. The output
displays privilege level and/or user role. The mode is displayed at the start of the output and both the privilege and roles for all users
is also displayed. If the role is not defined, the system displays "unassigned" .
Example of Displaying Information About Users Logged into the Switch
Dell#show users
Authorization Mode:
Line User
0 console 0 admin
*3 vty 1 sec1
4 vty 2 ml1
role or privilege
Role Privilege Host(s) Location
sysadmin 15
secadmin 14
netadmin 12
idle
idle 172.31.1.4
idle 172.31.1.5
663
Security