Setting Up User-Based Security (Snmpv3) - Dell Force10 Z9000 Configuration Manual
Hide thumbs
Also See for Force10 Z9000:
- Reference manual (1483 pages) ,
- Configuration manual (984 pages) ,
- Manual (56 pages)
Table of Contents
Advertisement
Setting Up User-Based Security (SNMPv3)
When setting up SNMPv3, you can set users up with one of the following three types of configuration for SNMP read/write
operations.
Users are typically associated to an SNMP group with permissions provided, such as OID view.
•
noauth — no password or privacy. Select this option to set up a user with no password or privacy privileges. This setting is the
basic configuration. Users must have a group and profile that do not require password privileges.
•
auth — password privileges. Select this option to set up a user with password authentication.
•
priv — password and privacy privileges. Select this option to set up a user with password and privacy privileges.
To set up user-based security (SNMPv3), use the following commands.
•
Configure the user with view privileges only (no password or privacy privileges).
CONFIGURATION mode
snmp-server user name group-name 3 noauth
•
Configure an SNMP group with view privileges only (no password or privacy privileges).
CONFIGURATION mode
snmp-server group group-name 3 noauth auth read name write name
•
Configure an SNMPv3 view.
CONFIGURATION mode
snmp-server view view-name oid-tree {included | excluded}
NOTE: To give a user read and write view privileges, repeat this step for each privilege type.
•
Configure the user with an authorization password (password privileges only).
CONFIGURATION mode
snmp-server user name group-name 3 noauth auth md5 auth-password
•
Configure an SNMP group (password privileges only).
CONFIGURATION mode
snmp-server group groupname {oid-tree} auth read name write name
•
Configure an SNMPv3 view.
CONFIGURATION mode
snmp-server view view-name 3 noauth {included | excluded}
NOTE: To give a user read and write privileges, repeat this step for each privilege type.
•
Configure an SNMP group (with password or privacy privileges).
CONFIGURATION mode
snmp-server group group-name {oid-tree} priv read name write name
•
Configure the user with a secure authorization password and privacy password.
CONFIGURATION mode
snmp-server user name group-name {oid-tree} auth md5 auth-password priv des56 priv
password
•
Configure an SNMPv3 view.
CONFIGURATION mode
snmp-server view view-name oid-tree {included | excluded}
Simple Network Management Protocol (SNMP)
691
Advertisement
Table of Contents
Troubleshooting
