Object Tracking; Object Tracking Overview - Dell Force10 Z9000 Configuration Manual

Hide thumbs Also See for Force10 Z9000:
Table of Contents

Advertisement

Object Tracking

IPv4/IPv6 object tracking is available on Dell Networking OS.
Object tracking allows the Dell Networking Operating System (OS) client processes, such as virtual router redundancy protocol
(VRRP), to monitor tracked objects (for example, interface or link status) and take appropriate action when the state of an object
changes.
NOTE: In Dell Networking OS release version 8.4.1.0, object tracking is supported only on VRRP.

Object Tracking Overview

Object tracking allows you to define objects of interest, monitor their state, and report to a client when a change in an object's state
occurs.
The following tracked objects are supported:
Link status of Layer 2 interfaces
Routing status of Layer 3 interfaces (IPv4 and IPv6)
Reachability of IPv4 and IPv6 routes
Metric thresholds of IPv4 and IPv6 routes
In future releases, environmental alarms and available free memory will be supported. You can configure client applications, such
VRRP, to receive a notification when the state of a tracked object changes.
The following example shows how object tracking is performed. Router A and Router B are both connected to the Internet via
interfaces running OSPF. Both routers belong to a VRRP group with a virtual router at 10.0.0.1 on the local area network (LAN) side.
Neither Router A nor Router B is the owner of the group. Although Router A and Router B use the same default VRRP priority (100),
Router B would normally become the master for the VRRP group because it has a higher IP address.
You can create a tracked object to monitor the metric of the default route 0.0.0.0/0. After you configure the default route as a
tracked object, you can configure the VRRP group to track the state of the route. In this way, the VRRP priority of the router with
the better metric as determined by open shortest path first (OSPF) automatically becomes master of the VRRP group. Later, if
network conditions change and the cost of the default route in each router changes, the mastership of the VRRP group is
automatically reassigned to the router with the better metric.
30
475
Object Tracking

Advertisement

Table of Contents
loading

Table of Contents