Implementing Ipv6 With Dell Networking Os - Dell Force10 Z9000 Configuration Manual

In IPv6, every interface, whether using static or dynamic address assignments, also receives a local-link address automatically in the
fe80::/64 subnet.

Implementing IPv6 with Dell Networking OS

Dell Networking OS supports both IPv4 and IPv6 and both may be used simultaneously in your system.
The following table lists the Dell Networking OS version in which an IPv6 feature became available for each platform. The sections
following the table give greater detail about the feature.
Feature and Functionality
Basic IPv6 Commands
IPv6 Basic Addressing
IPv6 address types: Unicast
IPv6 neighbor discovery
IPv6 stateless
autoconfiguration
IPv6 MTU path discovery
IPv6 ICMPv6
IPv6 ping
IPv6 traceroute
IPv6 SNMP
IPv6 Routing
Static routing
Route redistribution
Multiprotocol BGP extensions
for IPv6
IPv6 BGP MD5 Authentication 8.3.11
IS-IS for IPv6
IS-IS for IPv6 support for
redistribution
338
IPv6 Routing
Dell Networking OS Release
Introduction
Z9000
8.3.11
8.3.11
8.3.11
8.3.11
8.3.11
8.3.11
8.3.11
8.3.11
8.3.11
8.3.11
8.3.11
8.3.11
8.3.11
8.3.11
Documentation and Chapter
Location
IPv6 Basic Commands in the
Dell Networking OS Command
Line Interface Reference Guide.
Extended Address Space
IPv6 Neighbor Discovery
Stateless Autoconfiguration
Path MTU Discovery
ICMPv6
ICMPv6
ICMPv6
Assigning a Static IPv6 Route
OSPF, IS-IS, and IPv6 BGP
chapters in the Dell Networking
OS Command Line Reference
Guide.
IPv6 BGP in the Dell
Networking OS Command Line
Reference Guide.
IPv6 BGP in the Dell
Networking OS Command Line
Reference Guide.
Intermediate System to
Intermediate System
IPv6 IS-IS in the Dell
Networking OS Command Line
Reference Guide.
Intermediate System to
Intermediate System