Monitoring Ipv6 Ra Guard - Dell Force10 Z9000 Configuration Manual

3. Display the configurations applied on all the RA guard policies or a specific RA guard policy.
EXEC Privilege mode
show ipv6 nd ra-guard policy policy-name
The policy name string can be up to 140 characters.
Example of the show ipv6 nd ra-guard policy Command
Dell#show ipv6 nd ra-guard policy test
ipv6 nd ra-guard policy test
device-role router
hop-limit maximum
match ra ipv6-access-list
other-config-flag on
router-preference maximum medium
trusted-port
Interfaces :
Te 1/1
Dell#

Monitoring IPv6 RA Guard

To debug IPv6 RA guard, use the following command.
EXEC Privilege mode
debug ipv6 nd ra-guard [interface_type slot/port | count value]
The count range is from 1 to 65534. The default is infinity.
For a complete listing of all commands related to IPv6 RA Guard, refer to Dell Networking OS Command Line Reference Guide.
1
access
351
IPv6 Routing