Dell Force10 Z9000 Configuration Manual page 71

Hide thumbs Also See for Force10 Z9000:

Table of Contents

Press c to get into the grub mode.

You immediately enter the grub mode, which is indicated by the grub> prompt.

Assign the new location of the FTOS image to be used when the system reloads.

To boot from flash partition A:

grub> set primary_boot="f10boot flash0"

To boot from flash partition B:

grub> set primary_boot="f10boot flash1"

To boot from network:

grub> set primary_boot="f10boot tftp://10.16.127.35/FTOS-ZB.bin"

Assign an IP address and netmask to the Management Ethernet interface.

grub> set ipaddr="10.16.151.239"

grub> set netmask="255.255.0.0"

Assign an IP address as the default gateway for the system.

grub> set gatewayip="10.16.151.254"

Save the modified environmental variables.

grub> save_env environment_variables

NOTE: Repeat this step for all the environment variables.

Reload the system.

grub> reboot

Troubleshooting