Dell Force10 Z9000 Configuration Manual page 232

CONFIGURATION mode
ipv6 dhcp snooping vlan vlan-id
Adding a Static Entry in the Binding Table
To add a static entry in the binding table, use the following command.
• Add a static entry in the binding table.
EXEC Privilege mode
ip dhcp snooping binding mac
Adding a Static IPV6 DHCP Snooping Binding Table
To add a static entry in the snooping database, use the following command.
• Add a static entry in the snooping binding table.
EXEC Privilege mode
ipv6 dhcp snooping binding mac address vlan-id vlan-id ipv6 ipv6-address interface
interface-type | interface-number lease value
Clearing the Binding Table
To clear the binding table, use the following command.
• Delete all of the entries in the binding table.
EXEC Privilege mode
clear ip dhcp snooping binding
Clearing the DHCP IPv6 Binding Table
To clear the DHCP IPv6 binding table, use the following command.
• Delete all of the entries in the binding table.
EXEC Privilege mode
clear ipv6 dhcp snooping binding
Dell# clear ipv6 dhcp snooping?
binding Clear the snooping binding database
Displaying the Contents of the Binding Table
To display the contents of the binding table, use the following command.
• Display the contents of the binding table.
EXEC Privilege mode
show ip dhcp snooping
Example of the show ip dhcp snooping Command
View the DHCP snooping statistics with the show ip dhcp snooping command.
Dell#show ip dhcp snooping
IP DHCP Snooping
IP DHCP Snooping Mac Verification
IP DHCP Relay Information-option
IP DHCP Relay Trust Downstream
232
Dynamic Host Configuration Protocol (DHCP)
: Enabled.
: Disabled.
: Disabled.
: Disabled.