Dell Force10 Z9000 Configuration Manual page 484

• Display the configuration and status of currently tracked Layer 2 or Layer 3 interfaces, IPv4 or IPv6 routes, and a VRF instance.
show track [object-id [brief] | interface [brief] [vrf vrf-name] | ip route [brief] [vrf
vrf-name] | resolution | vrf vrf-name [brief] | brief]
• Use the show running-config track command to display the tracking configuration of a specified object or all objects
that are currently configured on the router.
show running-config track [object-id]
Example of Viewing the Configuration and Status of Tracked Layer 2/Layer 3 Interfaces
Example of the show track brief Command
Example of the show track resolution Command
Example of the show track vrf Command
Example of Viewing Object Tracking Configuration
Dell#show track
Track 1
IP route 23.0.0.0/8 reachability
Reachability is Down (route not in route table)
2 changes, last change 00:16:08
Tracked by:
Track 2
IPv6 route 2040::/64 metric threshold
Metric threshold is Up (STATIC/0/0)
5 changes, last change 00:02:16
Metric threshold down 255 up 254
First-hop interface is GigabitEthernet 13/2
Tracked by:
VRRP GigabitEthernet 7/30 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:16
First-hop interface is GigabitEthernet 13/2
Tracked by:
VRRP GigabitEthernet 7/30 IPv6 VRID 1
Track 4
Interface GigabitEthernet 13/4 ip routing
IP routing is Up
3 changes, last change 00:03:30
Tracked by:
Router# show track brief
ResId Resource
State LastChange
1 IP route reachability
Dell#show track resolution
IP Route Resolution
ISIS 1
OSPF 1
IPv6 Route Resolution
ISIS 1
Dell#show track vrf red
Track 5
IP route 192.168.0.0/24 reachability, Vrf: red
Reachability is Up (CONNECTED)
484
Object Tracking
Parameter
10.16.0.0/16